What is a view fence?
A view fence is open picket fencing, usually steel or aluminum, used where a solid wall would block a view. In Chandler it is often built as a short block base or block pilasters with iron panels between them. That way it matches the neighborhood's walls and still lets you see out.
Wrought iron, steel or aluminum?
Most fencing sold as "wrought iron" today is welded steel tubing. It is strong and easy to customize. Steel needs a good coating and touch-ups, especially where sprinklers hit the bottom rail. Aluminum does not rust and is lighter, but it is less rigid for wide gates. We tell you which fits your spot and why.
How do we keep iron from rusting in the desert?
- Primer and a durable finish, with powder coating offered when the budget allows.
- Posts set in concrete with the top shaped so water runs off.
- Sprinklers and drip lines aimed away from the bottom rail.
- A check of welds and touch-up spots before we leave.
One practical warning: dark metal in full summer sun gets hot enough to burn. Plan gate handles and latches with that in mind.
Can a view fence be a pool barrier?
Yes, if it is built to the pool rules. Chandler's pool guidance calls for openings that a 4-inch sphere cannot pass through, no hand or foot holds on the outside, and self-closing, self-latching gates. Horizontal rails need careful placement. See pool fences.
What does iron fencing cost?
As of October 2026, Angi lists wrought iron at about $25 to $55 per linear foot in the Phoenix area. HomeGuide's national figures for 4- to 6-foot wrought iron run about $50 to $85 per linear foot, more for custom ornamental work. Block pilasters and gates add to either number.
Which view fence fits your lot?
Choose steel between block pilasters for a classic look on a golf course or lake lot. Choose aluminum if rust worries you and the run has no wide gates. Choose a full block wall where privacy matters more than the view.